Before you wear your Oculus for Business headset with glasses, check to make sure that the width and height of your frames are the following sizes:

• Width: 142 mm or less

• Height: 50 mm or less

Once you've made sure that your glasses are the right size, insert the eyeglass spacer into your headset to provide a larger fit.

To insert the eyeglass spacer:

1. Using your fingers, carefully remove the lens rings and put them to one side.

• Place your headset face down on a flat, clean surface.

• Hold the headset still with one hand, and pull upwards from the outer edge of the lens ring until it comes loose. Repeat this step for the other lens ring.

2. Remove the facial interface foam.

3. Insert the glasses spacer and gently press the spacer into place.

• When the glasses spacer is correctly set, it should not move or fall out of the headset easily.

4. Reinsert the facial interface foam.

5. Using your fingers, carefully press the lens rings back in place until they click.

To put on your headset with glasses:

1. Loosen the side and top straps on your headset.

2. Starting from the front, put your headset on over the top of your glasses.

3. With the headset on your head, tighten the side straps and then the top strap to secure the headset.

To take off your headset with glasses:

1. Loosen the side and top straps.

2. With both hands, pull the headset forwards, then take it off.